Specifying with array

An array can be created using the array language construct. It takes any number of comma-separated key => value pairs as arguments.

array(
    key  => value,
    key2 => value2,
    key3 => value3,
    ...
)

The comma after the last array element is optional and can be omitted. This is usually done for single-line arrays, i.e. array(1, 2) is preferred over array(1, 2, ). For multi-line arrays on the other hand the trailing comma is commonly used, as it allows easier addition of new elements at the end.

Note:

A short array syntax exists which replaces array() with [].

<?php
$array = array(
    "foo" => "bar",
    "bar" => "foo",
);

// Using the short array syntax
$array = [
    "foo" => "bar",
    "bar" => "foo",
];
?>

The key can either be an int or a string. The value can be of any type.

Additionally the following key casts will occur:

• Strings containing valid decimal ints, unless the number is preceded by a + sign, will be cast to the int type. E.g. the key "8" will actually be stored under 8. On the other hand "08" will not be cast, as it isn't a valid decimal integer.
• Floats are also cast to ints, which means that the fractional part will be truncated. E.g. the key 8.7 will actually be stored under 8.
• Bools are cast to ints, too, i.e. the key true will actually be stored under 1 and the key false under 0.
• Null will be cast to the empty string, i.e. the key null will actually be stored under "".
• Arrays and objects can not be used as keys. Doing so will result in a warning: Illegal offset type.

If multiple elements in the array declaration use the same key, only the last one will be used as all others are overwritten.

<?php
$array = array(
    1    => "a",
    "1"  => "b",
    1.5  => "c",
    true => "d",
);
var_dump($array);
?>

array(1) {
  [1]=>
  string(1) "d"
}

PHP arrays can contain int and string keys at the same time as PHP does not distinguish between indexed and associative arrays.

<?php
$array = array(
    "foo" => "bar",
    "bar" => "foo",
    100   => -100,
    -100  => 100,
);
var_dump($array);
?>

array(4) {
  ["foo"]=>
  string(3) "bar"
  ["bar"]=>
  string(3) "foo"
  [100]=>
  int(-100)
  [-100]=>
  int(100)
}

The key is optional. If it is not specified, PHP will use the increment of the largest previously used int key.

<?php
$array = array("foo", "bar", "hello", "world");
var_dump($array);
?>

array(4) {
  [0]=>
  string(3) "foo"
  [1]=>
  string(3) "bar"
  [2]=>
  string(5) "hello"
  [3]=>
  string(5) "world"
}

It is possible to specify the key only for some elements and leave it out for others:

<?php
$array = array(
         "a",
         "b",
    6 => "c",
         "d",
);
var_dump($array);
?>

array(4) {
  [0]=>
  string(1) "a"
  [1]=>
  string(1) "b"
  [6]=>
  string(1) "c"
  [7]=>
  string(1) "d"
}

<?php
$array = array(
    1    => 'a',
    '1'  => 'b', // the value "a" will be overwritten by "b"
    1.5  => 'c', // the value "b" will be overwritten by "c"
    -1 => 'd',
    '01'  => 'e', // as this is not an integer string it will NOT override the key for 1
    '1.5' => 'f', // as this is not an integer string it will NOT override the key for 1
    true => 'g', // the value "c" will be overwritten by "g"
    false => 'h',
    '' => 'i',
    null => 'j', // the value "i" will be overwritten by "j"
    'k', // value "k" is assigned the key 2. This is because the largest integer key before that was 1
    2 => 'l', // the value "k" will be overwritten by "l"
);

var_dump($array);
?>

array(7) {
  [1]=>
  string(1) "g"
  [-1]=>
  string(1) "d"
  ["01"]=>
  string(1) "e"
  ["1.5"]=>
  string(1) "f"
  [0]=>
  string(1) "h"
  [""]=>
  string(1) "j"
  [2]=>
  string(1) "l"
}

Accessing array elements with square bracket syntax

Array elements can be accessed using the array[key] syntax.

<?php
$array = array(
    "foo" => "bar",
    42    => 24,
    "multi" => array(
         "dimensional" => array(
             "array" => "foo"
         )
    )
);

var_dump($array["foo"]);
var_dump($array[42]);
var_dump($array["multi"]["dimensional"]["array"]);
?>

string(3) "bar"
int(24)
string(3) "foo"

Note:

Prior to PHP 8.0.0, square brackets and curly braces could be used interchangeably for accessing array elements (e.g. $array[42] and $array{42} would both do the same thing in the example above). The curly brace syntax was deprecated as of PHP 7.4.0 and no longer supported as of PHP 8.0.0.

<?php
function getArray() {
    return array(1, 2, 3);
}

$secondElement = getArray()[1];
?>

Note:

Attempting to access an array key which has not been defined is the same as accessing any other undefined variable: an E_WARNING-level error message (E_NOTICE-level prior to PHP 8.0.0) will be issued, and the result will be null.

Note:

Array dereferencing a scalar value which is not a string yields null. Prior to PHP 7.4.0, that did not issue an error message. As of PHP 7.4.0, this issues E_NOTICE; as of PHP 8.0.0, this issues E_WARNING.

Creating/modifying with square bracket syntax

An existing array can be modified by explicitly setting values in it.

This is done by assigning values to the array, specifying the key in brackets. The key can also be omitted, resulting in an empty pair of brackets ([]).

$arr[key] = value;
$arr[] = value;
// key may be an int or string
// value may be any value of any type

If $arr doesn't exist yet or is set to null or false, it will be created, so this is also an alternative way to create an array. This practice is however discouraged because if $arr already contains some value (e.g. string from request variable) then this value will stay in the place and [] may actually stand for string access operator. It is always better to initialize a variable by a direct assignment.

Note: As of PHP 7.1.0, applying the empty index operator on a string throws a fatal error. Formerly, the string was silently converted to an array.

Note: As of PHP 8.1.0, creating a new array from false value is deprecated. Creating a new array from null and undefined values is still allowed.

To change a certain value, assign a new value to that element using its key. To remove a key/value pair, call the unset function on it.

<?php
$arr = array(5 => 1, 12 => 2);

$arr[] = 56;    // This is the same as $arr[13] = 56;
                // at this point of the script

$arr["x"] = 42; // This adds a new element to
                // the array with key "x"
                
unset($arr[5]); // This removes the element from the array

unset($arr);    // This deletes the whole array
?>

Note:

As mentioned above, if no key is specified, the maximum of the existing int indices is taken, and the new key will be that maximum value plus 1 (but at least 0). If no int indices exist yet, the key will be 0 (zero).

Note that the maximum integer key used for this need not currently exist in the array. It need only have existed in the array at some time since the last time the array was re-indexed. The following example illustrates:

<?php
// Create a simple array.
$array = array(1, 2, 3, 4, 5);
print_r($array);

// Now delete every item, but leave the array itself intact:
foreach ($array as $i => $value) {
    unset($array[$i]);
}
print_r($array);

// Append an item (note that the new key is 5, instead of 0).
$array[] = 6;
print_r($array);

// Re-index:
$array = array_values($array);
$array[] = 7;
print_r($array);
?>

The above example will output:

Array
(
    [0] => 1
    [1] => 2
    [2] => 3
    [3] => 4
    [4] => 5
)
Array
(
)
Array
(
    [5] => 6
)
Array
(
    [0] => 6
    [1] => 7
)

Array destructuring

Arrays can be destructured using the [] (as of PHP 7.1.0) or list language constructs. These constructs can be used to destructure an array into distinct variables.

<?php
$source_array = ['foo', 'bar', 'baz'];

[$foo, $bar, $baz] = $source_array;

echo $foo;    // prints "foo"
echo $bar;    // prints "bar"
echo $baz;    // prints "baz"
?>

Array destructuring can be used in foreach to destructure a multi-dimensional array while iterating over it.

<?php
$source_array = [
    [1, 'John'],
    [2, 'Jane'],
];

foreach ($source_array as [$id, $name]) {
    // logic here with $id and $name
}
?>

Array elements will be ignored if the variable is not provided. Array destructuring always starts at index 0.

<?php
$source_array = ['foo', 'bar', 'baz'];

// Assign the element at index 2 to the variable $baz
[, , $baz] = $source_array;

echo $baz;    // prints "baz"
?>

As of PHP 7.1.0, associative arrays can be destructured too. This also allows for easier selection of the right element in numerically indexed arrays as the index can be explicitly specified.

<?php
$source_array = ['foo' => 1, 'bar' => 2, 'baz' => 3];

// Assign the element at index 'baz' to the variable $three
['baz' => $three] = $source_array;

echo $three;    // prints 3

$source_array = ['foo', 'bar', 'baz'];

// Assign the element at index 2 to the variable $baz
[2 => $baz] = $source_array;

echo $baz;    // prints "baz"
?>

Array destructuring can be used for easy swapping of two variables.

<?php
$a = 1;
$b = 2;

[$b, $a] = [$a, $b];

echo $a;    // prints 2
echo $b;    // prints 1
?>

Note:

The spread operator (...) is not supported in assignments.

Note:

Attempting to access an array key which has not been defined is the same as accessing any other undefined variable: an E_WARNING-level error message (E_NOTICE-level prior to PHP 8.0.0) will be issued, and the result will be null.

Why is $foo[bar] wrong?

Always use quotes around a string literal array index. For example, $foo['bar'] is correct, while $foo[bar] is not. But why? It is common to encounter this kind of syntax in old scripts:

<?php
$foo[bar] = 'enemy';
echo $foo[bar];
// etc
?>

This is wrong, but it works. The reason is that this code has an undefined constant (bar) rather than a string ('bar' - notice the quotes). It works because PHP automatically converts a bare string (an unquoted string which does not correspond to any known symbol) into a string which contains the bare string. For instance, if there is no defined constant named bar, then PHP will substitute in the string 'bar' and use that.

Note: This does not mean to always quote the key. Do not quote keys which are constants or variables, as this will prevent PHP from interpreting them.

<?php
error_reporting(E_ALL);
ini_set('display_errors', true);
ini_set('html_errors', false);
// Simple array:
$array = array(1, 2);
$count = count($array);
for ($i = 0; $i < $count; $i++) {
    echo "\nChecking $i: \n";
    echo "Bad: " . $array['$i'] . "\n";
    echo "Good: " . $array[$i] . "\n";
    echo "Bad: {$array['$i']}\n";
    echo "Good: {$array[$i]}\n";
}
?>

The above example will output:

Checking 0: 
Notice: Undefined index:  $i in /path/to/script.html on line 9
Bad: 
Good: 1
Notice: Undefined index:  $i in /path/to/script.html on line 11
Bad: 
Good: 1

Checking 1: 
Notice: Undefined index:  $i in /path/to/script.html on line 9
Bad: 
Good: 2
Notice: Undefined index:  $i in /path/to/script.html on line 11
Bad: 
Good: 2

More examples to demonstrate this behaviour:

<?php
// Show all errors
error_reporting(E_ALL);

$arr = array('fruit' => 'apple', 'veggie' => 'carrot');

// Correct
print $arr['fruit'];  // apple
print $arr['veggie']; // carrot

// Incorrect.  This works but also throws a PHP error of level E_NOTICE because
// of an undefined constant named fruit
// 
// Notice: Use of undefined constant fruit - assumed 'fruit' in...
print $arr[fruit];    // apple

// This defines a constant to demonstrate what's going on.  The value 'veggie'
// is assigned to a constant named fruit.
define('fruit', 'veggie');

// Notice the difference now
print $arr['fruit'];  // apple
print $arr[fruit];    // carrot

// The following is okay, as it's inside a string. Constants are not looked for
// within strings, so no E_NOTICE occurs here
print "Hello $arr[fruit]";      // Hello apple

// With one exception: braces surrounding arrays within strings allows constants
// to be interpreted
print "Hello {$arr[fruit]}";    // Hello carrot
print "Hello {$arr['fruit']}";  // Hello apple

// This will not work, and will result in a parse error, such as:
// Parse error: parse error, expecting T_STRING' or T_VARIABLE' or T_NUM_STRING'
// This of course applies to using superglobals in strings as well
print "Hello $arr['fruit']";
print "Hello $_GET['foo']";

// Concatenation is another option
print "Hello " . $arr['fruit']; // Hello apple
?>

When error_reporting is set to show E_NOTICE level errors (by setting it to E_ALL, for example), such uses will become immediately visible. By default, error_reporting is set not to show notices.

As stated in the syntax section, what's inside the square brackets ('[' and ']') must be an expression. This means that code like this works:

<?php
echo $arr[somefunc($bar)];
?>

This is an example of using a function return value as the array index. PHP also knows about constants:

<?php
$error_descriptions[E_ERROR]   = "A fatal error has occurred";
$error_descriptions[E_WARNING] = "PHP issued a warning";
$error_descriptions[E_NOTICE]  = "This is just an informal notice";
?>

Note that E_ERROR is also a valid identifier, just like bar in the first example. But the last example is in fact the same as writing:

<?php
$error_descriptions[1] = "A fatal error has occurred";
$error_descriptions[2] = "PHP issued a warning";
$error_descriptions[8] = "This is just an informal notice";
?>

because E_ERROR equals 1, etc.